IKO TAM 2510 needle roller bearings

Fillet Radius ra:1.00 mm; D:62.0000 mm; d:25.000 mm; Grease Speed Rating n1:11000 rpm; Basic Dynamic Radial Load Rating C:21200 N; Basic Static Radial Load Rating Co:13700 N; Oil Speed Rating n2:14000 rpm; B:17.00 mm;

ba:107.95 mm; Cap bolt, SAE grade:5; H1:241.3 mm; J min.:628.65 mm; J max.:708.025 mm; Pa:95.2 kN; Ca:153.797 mm; Da:399.999 mm; N1:41.275 mm; Cap bolt recommended tightening torque:400 N·m;

H:178.5 mm; DN:6.5 mm; Housing:FYTB 509 M; d:44.45 mm; Fatigue load limit Pu:0.915 kN; Rα:45 °; A5:26.5 mm; SWN:7 mm; A1:14 mm; J6:120.5 mm;

Basic Radial Load Rating-Static SCO:6700 N; Speed Rating-Single and Double Sealed Grease SDG:10000 rpm; Fillet Radius ra:1.00 mm; Accessories:8000 One Seal; Old MRC Bearing Number:204FS; Width - Overall B:15.9 mm; Width - Outer Ring B0:14.0 mm; Basic Interchange NDH:8504; Width - Inner Ring B1:15.20

B:102 mm; ra (max):3 mm; Center Guidance:Fixed Inner Ring Rib; Fillet Radius/Chamfer:4 mm; Axial Load Factor Y2:2.72; Limiting Speed - Grease:1,600 rpm; Groove Width A:22 mm; Bore Type:Tapered Bore; Radial Clearance:0.120 to 0.160 mm; Static Load Rating:1,520,000 N;

Basic Dynamic Radial Load Rating C:85200 N; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:4800 rpm; B:26.00 mm; Basic Static Radial Load Rating Co:90000 N; d:105.000 mm; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:4000 rpm; D:160.0000 mm;

B:21 mm; dc (min):41 mm; db (max):38 mm; db (min):33.5 mm; d:25 mm; D:80 mm; Outside Ring Inside Diameter:62.8 mm; Radial Clearance:0.020 to 0.045 mm; da (min):33.5 mm; Enclosure:Open;

Mass needle roller:2.44 g; r2 max.:1 mm; r1 max.:0.8 mm; Lw:15.8 mm; r1,2 min.:0.3 mm; Dw:5 mm;

D:72.0000 mm; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:9000 rpm; Oil Speed Rating n2:11000 rpm; Accessories:Two Seals & Snap-Rin; B:17.00 mm; Grease Speed Rating Open/Shielded n1:9000 rpm; Basic Dynamic Radial Load Rating C:25500 N; Oil Speed Rating Open/Shielded n2:11000 rpm; d:35.000 mm;

Bore Type:Cylindrical Bore; ra (max):4 mm; Fillet Radius/Chamfer:5 mm; D:500 mm; Configuration:Single Row; Da (max):478 mm; Factor fo:15.3; Static Load Rating:550,000 N; Limiting Speed - Grease:1,000 rpm; da (min):302 mm;

Fillet Radius ra:1.00 mm; Oil Speed Rating n2:12000 rpm; Grease Speed Rating n1:8500 rpm; Sealed Speed Rating n3:8500 rpm; Basic Static Radial Load Rating Co:20000 N; Accessories:Two Shields & Snap-R; B:22.20 mm; Basic Dynamic Radial Load Rating C:23800 N; D:52.0000 mm; d:20.000 mm;

Basic Static Radial Load Rating Co:176000 N; Fillet Radius ra:2.50 mm; B:73.00 mm; Sealed Speed Rating n3:2200 rpm; D:180.0000 mm; Accessories:Two Shields & Snap-R; Basic Dynamic Radial Load Rating C:195000 N; Oil Speed Rating n2:3200 rpm; d:85.000 mm; Grease Speed Rating n1:2200 rpm;

Dynamic Load Rating:62,000 N; D:110 mm; da (min):60 mm; Weight:1.070 kg; Radial Clearance:0.018 to 0.036 mm; d:50 mm; Configuration:Single Row; Limiting Speed - Grease:4,300 rpm; B:27 mm; Enclosure:Double Seal;

B:106 mm; d1:825 mm; Mass lock nut:186 kg; Lock washer / Locking clip:MS 31/710; B5:133 mm; d3:900 mm; b:55 mm; Associated spanner:TMFN 600-750; h:30 mm; G:Tr 710x7;

D:480 mm; D1 ≈:403 mm; Reference speed:850 r/min; r1,2 min.:2 mm; Basic dynamic load rating C:260 kN; Basic static load rating C0:1630 kN; Minimum load factor A:14; ra max.:2 mm; Fatigue load limit Pu:28.5 kN; Mass bearing (including seat washer where applicable):16.5 kg;